pH, ORP, and Titration, Combination Electrodes
Hach Company Radiometer Analytical PHC3359-8 Combination pH Electrode for Microsamples (d=3 mm, glass body, BNC)
The Radiometer PHC3359-8 Combination pH Electrode has a glass body, Ag/AgCl reference system, refillable electrolyte (3M KCl + sat. AgCl) and micro diameter (3 mm) for small volume sample measurements. The PHC3359-8 has a BNC connector and is compatible with Hach Sension+ laboratory pH meters.
Hach Company Radiometer Analytical PHC2085-8 Combination Red-Rod pH Electrode with Temperature Sensor (epoxy body, BNC+cinch)
The Radiometer PHC2085-8 Combination pH Electrode has a robust epoxy body, Red-Rod reference system, refillable electrolyte (sat. KCl), integrated temperature sensor, and porous pin junction for general purpose applications. The PHC2085-8 has BNC + cinch (RCA) connectors. Please reference the PHC2085-6 (article no. E16M345) for a version of this probe compatible with Hach Sension+ laboratory pH meters.
Hach Company Radiometer Analytical PHC3185-8 Combination pH Electrode with Temperature Sensor (gel electrolyte, epoxy body, BNC+cinch)
The Radiometer PHC3185-8 Combination pH Electrode has a robust epoxy body, Ag/AgCl reference system, non-refillable gel electrolyte (3M KCl), integrated temperature sensor, and open junction for general purpose applications. The PHC3185-8 has BNC + cinch (RCA) connectors. Please note that the PHC3185-8 is not compatible with Hach Sension+ laboratory pH meters.
Hach Company Radiometer Analytical PHC2401-8 Combination Red-Rod pH Electrode (glass body, BNC)
The Radiometer PHC2401-8 Combination pH Electrode has a glass body, Red-Rod reference system, refillable electrolyte (sat. KCl) and annular ring junction for general purpose applications. The PHC2401-8 is compatible with Hach Sension+ laboratory pH meters (or any meter with a BNC connection).
Cole-Parmer GF Signet 3-2726-00 pH Electrode, Pt-1000 ATC, 3/4" NPT Threads
Electrodes use a unique foul-proof DryLoc connector with gold plated contacts for extended lifetime. Choice of flat pH, bulb pH, and flat ORP sensing elements provides for a broad range of uses. HF resistant versions are for use in applications where traces of hydrofluoric acid will attack standard glass. LC versions are designed for use in low conductivity fluids and ultrapure water applications.
Grass Technologies SIGNAGEL ELECTRODE CONDUCTIVE
SignaGel electrode conductive gel, 8.5oz tube, 1 per package.
Metrohm USA SOLITROTE W/PT 1000
Durable standard electrode: Robust and reliable, ideal for routine laboratory use.
Cole-Parmer Oakton "All-in-one" pH Electrode, single-junction, epoxy-body, gel-filled
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Supply Solutions Hanna Instruments - pH electrode For Meat
Hanna Instruments - pH electrode For Meat
Cole-Parmer Oakton Ion Selective Electrode (ISE), Single-Junction, Epoxy; Chloride
A wide variety of ion selective electrodes are availabe to suit a wide array of applications. Select from four electrode types: membrane, solid-state, gas sensing, and glass bulb; typical response time is 20 to 30 seconds. Epoxy-body ISEs are either single- or double-junction, and the glass-body type is double junction.
Hach Company Hach PEEK Salt Bridge, Ceramic Outer-Junction for pHD Differential pH/ORP Sensors
Replacement salt bridge for Hach pHD differential pH and ORP sensors. The PEEK body with ceramic outer junction is field-replaceable and is shipped in a salt solution to prevent dehydration; replace every 6 months for optimum performance.
- PEEK body with ceramic outer junction
- FKM/FPM O-ring for chemical compatibility
- Shipped in salt solution to prevent dehydration
- Field-replaceable double-junction design
- Recommended replacement every 6 months for optimum performance
Cole-Parmer Oakton Electrode pH All-in-one SJ with ATC for 600 Series Meters
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cole-Parmer pH Electrode for Ultrapure Water
Electrode has 10-ft long cable with BNC pH connector and tinned end for solution ground.
Cole-Parmer Oakton Single-junction, semi-dome, polygel reference, temperature sensor w/ waterproof connection (Anthony) pH electrode, 100C, 12 mm x 115mm,30K ATC.
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.